Wacker Neuson KRAMER 5055e Скачать руководство пользователя страница 150

Страница: 150 / 420

5-24

BA 357-00 * 3.0 * 35700_05_Bedienung.fm

5 Operation

Rotating beacon (option)

The press rocker switch

for the rotating beacon (opt) is located on the

front switch panel to the right, next to the operator seat.

Information

Fold up and lock the rotating beacon before using it.
Fold down and lock the rotating beacon again after use.

Information

In Germany, the rotating beacon may only be switched on public roads if,

►

the road is within the machine’s working range,

►

the machine is an obstruction to the normal flow of traffic during work
operation,

►

the machine is equipped with a warning identification at the front and
rear according to DIN 30710 (opt).

►

Get informed on and follow the legal regulations of your country.

Interior light (only in cabin cpl.)

The interior light

is located at the top right of the cabin roof.

Fig. 115

Rotating beacon operation

Function

Press switch

position

➥

The indicator light in the
switch illuminates.

AUS

Press switch

position

➥

Indicator light in switch
extinguishes.

Fig. 116

Interior light operation

Press switch

upward or downward.

AUS

Move switch

to centre position.

Содержание KRAMER 5055e





































































































































































































































































































































































































































Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson KRAMER 5055e, Руководство оператора

Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Бренды по названию

Популярные бренды