Wacker Neuson KRAMER 5055e, Руководство оператора

Страница: 221 / 420

BA 357-00 * 3.0 * 35700_05_Bedienung.fm
5-95
Operation 5
Fitting attachments from other manufacturers (opt)
Quickhitches for attachments from other manufacturers
• The following quickhitches can be purchased from your dealer and
installed by an authorized service center:
- Quickhitch for EURO attachments
- Quickhitch for SKID STEER attachments
• Important!
Only attachments that have been approved for this use and that
have an approved load diagram may be used with the quickhitch
– see chapter 3 “Attachments for SKID STEER quickhitch (currently
not available)” on page 3-21
Attachments for EURO quickhitch on
page 3-23 .
• If other attachments are used, conformity (stability test) in accordance
with the EC machine guideline or the DIN EN 474-3 standard must be
checked and documented by an authorized service center.
In the case of non-EU countries, follow and apply the national
regulations of these countries.
• Refer to the following information sheets on page 5-97 "Stability calcu-
lations for attachments from other manufacturers" for the stability test.
• Warranty and the operation license become void if non-approved
attachments are installed, or if parts of the quickhitch or attachment
(with a prescribed condition or quality, or the operation of which can
put persons at risk) are subsequently modified or replaced.
• In addition to the Operator’s Manual, observe and instruct the operator
in all other generally applicable, legal and other mandatory regulations
relevant to accident prevention and environmental protection.