Wacker Neuson KRAMER 5055e страница 193 Скачать руководство пользователя

Страница: 193 / 420

BA 357-00 * 3.0 * 35700_05_Bedienung.fm

5-67

Operation 5

5.11 Work operation

Important safety instructions for work operations

WARNING

The machine risks tipping over if sinks or falls into a pit!

Can cause serious injury or death.

►

Never drive up to the edge of a pit from outside.

►

Never undermine the foundations of walls.

WARNING

Risk of death due to electric high-voltage cables, underground
cables, gas and water pipes!

Can cause serious injury or death.

►

Keep a safe distance from supply lines.

►

Contact the energy supplier before starting work and clarify details.

WARNING

Crushing hazard due to tipping over of vehicle!

A tipping vehicle can cause serious injury or death. There is a tipping
hazard, in particular in curves.

►

Lower the loader unit to transport position before starting machine
travel.

►

Adapt the travel speed to the prevailing conditions.

►

Adapt the driving speed to the material loaded.

►

Pay attention to persons and obstacles.

►

Reduce speed before downhill travel.

►

Ensure good visibility of the material you want to pick up and of the
work and travel range.

►

Do not perform any U-turns on steep slopes.

►

Whenever possible, perform machine travel in reverse when
transporting material on a steep slope.

►

Always fasten your seat belt.

►

Do not hold body parts outside of the machine.

►

Carefully steer the machine if the loader unit is raised.

►

Do not exceed the permissible payloads -- see load diagram.

Содержание KRAMER 5055e





































































































































































































































































































































































































































Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды

Wacker Neuson KRAMER 5055e, Руководство оператора

Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды