Wacker Neuson BFS735, Руководство оператора

Страница: 20 / 56

3 Safety
18
Before ending the wet cutting process, allow the cutting blade to run without the wa-
ter sprayer until it is dry.
Not exceeding the maximum tilt position
Do not exceed the maximum tilt position (see the description in the Maximum
permissible tilt chapter).
Only operate the machine at maximum tilt for short periods of time.
If you exceed the maximum tilt, the engine lubrication system will fail and thus inev-
itably damage important engine parts.
Notes regarding work methods
Fold down the protective hood fully. The protective hood can catch material
flung away from the work area and divert it away from the operator.
Particularly when starting the engine you have to make sure that the cutting
blade does not come into contact with anything.
Always operate the machine at full throttle even when first placing it into the cut.
When first placing the the cutting blade into the cut, set it slowly onto the mate-
rial. Excessive pressure can damage the cutting blade.
Move the machine in a straight line together with the cutting blade. Pressure
from the side can damage the cutting blade.
Avoid cutting tight curves.
On sloping carriageways and surfaces, pressure must not be applied to the side
of the blade.
Never exceed the maximum speed (printed on cutting blade).
Removing foreign objects before cutting
Before cutting, remove foreign objects such as nails, etc. from the cutting area.
Cutting various materials
Do not process loose materials (e.g. paving stones).
Do not cut into the gravel area using diamond-edged cutting blades.
When cutting on the edge of the track or when cutting two different materials
(cutting in the joint area), uneven wear is possible.
Do not touch a rotating cutting blade
Never touch a rotating cutting blade with your hand or any other body part.
Danger of severe injury.
Pay attention and exercise caution when working with ear protection
When wearing ear protection you must pay attention and exercise caution because
your hearing is limited, e.g. in case someone screams or a signal tone sounds.
Danger of fire due to sparks
Danger of fire due to hot workpiece particles flung away from the work area.
Do not work near flammable materials.
Only wear clothing made of material that is not easily flammable.