Wacker Neuson BFS735, Руководство оператора

Страница: 27 / 56

7 Transport to the worksite
25
7 Transport to the worksite
Requirements:
When transporting the floor saw, use only suitable hoisting gear with a minimum
load-bearing capacity of 150 kg.
Always turn off the motor during transportation!
Empty the water tank!
Remove the cutting blade prior to transport. Set the lowest cutting position on
the floor saw.
Remove the water tank and attach the hoisting gear on the transport strap for
lifting.
If you transport the floor saw on the cargo area of a vehicle, strap it down se-
curely on the special safety bar.
Fold up the guide wheel and stirrup handle.
Handles, guide wheel and other operating controls must not be used as attach-
ment points.
Note: Also observe the regulations in the chapter Safety information.
Pos. Description Pos. Description
1 Transport strap 3 Stirrup handle
2 Guide wheel
3
2
1