Wacker Neuson BFS735, Руководство оператора

Страница: 30 / 56

8 Operation
28
8.5 Parking brake
Integrated parking brake
The machine features an integrated parking brake.
The front wheels are automatically blocked in transport position (lowest cutting po-
sition without a cutting blade) or if the maximum cutting depth is exceeded.
8.6 Assembling the cutting blade
8.6.1 Checking a new cutting blade:
The blade type must be suitable for the material to be cut. Observe the periph-
eral speed, refer to the "Technical data"!
The arbor diameter of the cutting blade must precisely fit the shaft to ensure
smooth blade running.
The cutting blade must be undamaged.
Observe the correct direction of rotation of the cutting blade! That means the ro-
tational direction mark on the cutting blade must correspond with the rotational
direction mark on the cutting blade guard.
8.6.2 Proceed as follows for the assembly of the cutting blade:
1. Fold up the cutting blade guard using the handle.
2.
Prior to the assembly of the cutting blade, clean the spring washers and the lock-
ing pin and check them for damage.
3.
Attach cutting blade and spring washer on the shaft.
4.
Tighten the hexagonal bolt firmly. To do this, apply counter pressure on the
spanner surfaces of the cutting shaft.
5.
Fold down the cutting blade guard.
Starting the machine is only permitted with a water hose connected and the wa-
ter supply turned on.
Pos. Description
1 Cutting blade guard
1
Risk of injury due to sharp cutting blade.
> Only fold up the cutting blade guard using the handle.
Caution