Wacker Neuson BFS735, Руководство оператора

Страница: 21 / 56

3 Safety
19
Notes regarding cutting blades
The cutting blade must be suitable for use with the cut-off saw.
The cutting blade must be suitable for the material to be cut.
The speed allowed for the cutting blade must be the same as or higher than the
maximum machine spindle speed.
Mount the cutting blade such that its rotation direction is the same as that of the
machine.
Only use cutting blades with permissible cutting blade diameters.
When using cutting blades with a hole diameter greater than the machine shaft,
use the suitable adapter ring.
Only use undamaged cutting blades.
Ensure that you also follow the instructions of the cutting blade manufacturer.
Do not use cutting blades that have fallen.
Change the cutting blade only when the engine has been turned off.
Always tighten the cutting blade with the specified torque.
Test the new cutting blade for approx. 1 min at maximum speed (without cut-
ting).
Only use cutting blades with use-by dates that have not expired.
When storing cutting blades, always lay them flat in an area that is protected
from frost.
3.8 Maintenance
Maintenance work
Service and maintenance work must only be carried out to the extent described in
these operating instructions. All other procedures must be performed by your
Wacker Neuson representative.
For further information, refer to chapter
Maintenance .
It is not permitted to tilt the machine for maintenance work.
Switching off the engine
Before carrying out care or maintenance work, switch off the engine and allow it to
cool down.
For gasoline powered engines, you must pull off the spark plug cap.
Checking the ignition system
Caution: the electronic ignition generates a very high voltage.