Wacker Neuson BFS735, Руководство оператора

Страница: 16 / 56

3 Safety
14
Work environment
Familiarize yourself with your work environment before you start work. This includes
e.g. the following items:
Obstacles in the work and traffic area.
Load-bearing capacity of the ground.
The measures needed to cordon off the construction site from public traffic in
particular.
The measures needed to secure walls and ceilings.
Options available in the event of an accident.
Safety in the work area
When working with the machine especially pay attention to the following points:
Electric lines or pipes in work area.
Gas lines or water lines in the work area.
Material becoming separated, dropping down or ejected. Make sure that you do
not put other persons in danger.
Pay maximum attention in the vicinity of drops or slopes. Risk of falling.
Maintain a sufficient distance from flammable materials.
Checks before starting work
Check the following points before beginning work:
Condition of cutting blade.
Safety devices.
Switch and current-carrying lines for damage and corrosion.
Tightness of the cutting blade.
Machine settings.
Vibration damper for wear, cracks and misalignment.
Starting the machine
Observe the safety information and warning notices located on the machine and
in the operator's manual.
Never attempt to start a machine that requires maintenance or repairs.
Start the machine as described in the operator's manual.
Vertical stability
Always ensure that the machine is vertically stable and cannot tip over, roll or slide
away.
Proper operator position
Do not leave the proper operator position while operating the machine.
The intended operator position is at the controls behind the machine.
Caution with hot parts
Do not touch the machine during or shortly after operation. Some parts can become
very hot and can cause severe burns.