Wacker Neuson BFS735, Руководство оператора

Страница: 37 / 56

9 Maintenance
35
Cleaning the cyclone housing:
If dirt accumulates in the cyclone housing, unscrew the three special flat head
screws and wipe the components or rinse them with water. Then completely dry
off the components and assemble them carefully.
Caution:
During the reassembly of the cyclone, make sure that the cloth of the air inlet fits
properly into the groove of the preliminary filter cap.
Install the air horn in the correct direction.
9.5 Cleaning the filter cup
Close the fuel tap. Remove the filter cup with the o-ring and wash it out with non-
combustible and low-flammable solvent. Allow it to completely dry, then reinstall
it and tighten it firmly. Open the fuel tap and check for leaks.
9.6 Idle setting
Start the engine and let it warm up to its normal operating temperature.
Adjust the idle speed limiting screw while the engine is running in order to reach
the prescribed idle speed.
Prescribed idle speed: 1,400 ± 150 rpm.
Pos. Description
1 Idle speed limiting screw
1