Wacker Neuson BFS735, Руководство оператора

Страница: 10 / 56

3 Safety
8
3 Safety
3.1 Principle
State of the art
This machine has been constructed with state-of-the-art technology according to
the recognized rules of safety. Nevertheless, when used improperly, dangers to the
life and limb of the operator or to third persons or damage to the machine or other
materials cannot be excluded.
State of the art
This machine has been constructed with state-of-the-art technology according to
the recognized rules of safety. Nevertheless, when used improperly, dangers to
the life and limb of the operator or to third persons or damage to the machine or
other materials cannot be excluded.
Proper use
The machine must only be used for the following purposes:
Cutting expansion joints in concrete, asphalt and screed.
Cutting out damaged areas of concrete and asphalt.
Straightening blacktops and concrete surfaces.
Sawing off precast concrete parts.
The machine may only be used with cutting blades that are intended for use with
the machine and the material to be cut.
The machine may not be used for the following purposes:
Cutting wood.
Cutting plastics.
Cutting materials that contain asbestos.
The machine may not be operated with blades, knives, brushes, etc.
Its proper use also includes the observance of all instructions contained in this
operator's manual as well as complying with the required service and
maintenance instructions.
Any other use is regarded as improper. Any damage resulting from improper use
will void the warranty and the liability on behalf of the manufacturer. The operator
assumes full responsibility.
Structural modifications
Never attempt to modify the machine without the written permission of the manufac-
turer. To do so will endanger your safety and the safety of other people! In addition,
this will void the warranty and the liability on behalf of the manufacturer.
Especially the following are cases of structural modifications:
Opening the machine and the permanent removal of components from Wacker
Neuson.