VTEL WG500, Руководство по установке

Страница: 53 / 104

AppsView toolbars
4.5
WG500
TM
Toolbar 3
This toolbar controls the preset positions for the PTZ camera. For information on
camera presets, please see Chapter 5.
Using the Connection Interface window
When you click the Show Connection Interface button on the AppsView toolbar, the
Connection Interface window will open. All outgoing video or voice calls are placed
from this location. The Connection Interface window has four tabs:
•
The Speed-Dialer tab shows all of the sites that are listed in your Address
Book, while the Speed Dial buttons offer quick access to sites you call
frequently.
•
Use the Hand-Dialer tab to call numbers that you use infrequently and
therefore do not need to enter into your Address Book.
•
Use the Address Book tab to maintain a list of numbers you call frequently.
•
The Call Log tab maintains a record of all incoming and outgoing calls. You
can determine the information displayed and how it is organized.
Making an ad hoc video call
Ad hoc calling lets you dial a call on the fly. You may want to use this method to call a
site you do not call often enough to need an entry in the Address Book.
There are four types of calls that can be made using AppsView, depending on the
network being used by the caller and the recipient.
•
H.320 (WAN) to H.320 (WAN)
•
H.323 (LAN) to H.323 (LAN)
•
H.320 (WAN) to H.323 (LAN)
•
H.323 (LAN) to H.320 (WAN)
•
The types of calls you can make are limited by
what capabilities are enabled.
If H.323 is not enabled, only H.320 and H.320 to
H.323 calls can be made.
If H.323 is enabled but a gateway is not present
on your LAN, only H.320, H.323 and H.320 to
H.323 calls can be made.