VTEL WG500, Руководство по установке

Страница: 25 / 104

Installation steps overview
2.17
WG500
TM
Completing camera cable connections
Locate the camera serial cable in the VTEL peripherals box.
Use the tie wraps provided in the VTEL peripherals box to secure your cables into an
orderly group. VTEL recommends placing a wrap at several points along the length of
the cables.
CONNECT TO
Small end of camera serial cable (yellow)
Yellow
VISCA In
on the back of the PTZ camera
Remaining (large) end of the camera serial cable
(yellow)
Yellow Serial Port 1 on the back of the PC
to VISCA In connector
x x x
The Xs indicate the connectors
that remain unused in a single
camera set-up. For
information on connecting
two PTZ cameras, see “Second
PTZ camera” on page 2.21.
Back of PTZ camera
Back of PC
Connect camera serial cable here