background image

 

INTRODUCTION 

 
 

INTRODUCTION - 

Welcome

  

Thank you for purchasing a Voyager Long-Range wireless phone system.  To ensure that you optimize the full capabilities 
of this product, please read this user’s manual before proceeding.  Be sure to keep this manual for future reference in 
case any problems or questions should arise.  We hope you enjoy your new Voyager wireless phone system.  

 

INTRODUCTION - 

Important Safety Information

  

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire,  
electric shock and personal injury.  Please read the following before using your equipment:    

1.  Read and follow all instructions carefully. 
2.  Follow all warnings and instructions on the product. 
3.  Unplug the product from the host telephone equipment before cleaning.  Do not use liquid cleaners or aerosol  

cleaners.  Use a damp cloth for cleaning.  

4.  Do not use this product near water. 
5.  Do not place this product on top of a metal surface.  Do not place this product on an unstable cart, stand or  

table. 

6.  Do not allow anything to rest on the power cords.  Do not place this product in a location where the cords can  

be stepped on or where someone can trip over them. 

7.  Do not use this product near an area where there is a potential of gas leaks or near any fumes that can be  

explosive.  If you notice that the equipment is being used in such a hazardous area, report this condition on a  
telephone that is located in a safe location. 

8.  Do not place this equipment near or over a radiator or any other heat source. 
9.  Use ONLY the power adapter supplied with the system. 
10.  Do not overload the wall outlet or power cord where the power adapter is installed.  This can result in fire or  

electric shock. 

11.  This equipment is to be opened by ONLY a qualified serviceperson.  There are no user serviceable parts  

inside.  Opening this equipment may expose you to dangerous voltage and other risks.  Incorrect reassembly of  
this equipment may result in electric shock. 

12.  Avoid spilling liquid on this equipment and do not insert any objects through the ventilation slots. 
13.  Avoid using this equipment during an electrical storm.  There is a remote risk of electrical shock from lightning. 
14.  Do not use this equipment other than for its purpose intended by the manufacturer.  Use ONLY the equipment  

provided by the manufacturer. 

15.  Do not break open the batteries and do not dispose of them in fire.  Dispose of batteries safely or contact your  

local recycling center.  Batteries contain corrosive materials that are dangerous to you and to the environment.  

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание CL-2200XP/PBX
























































Отзывы: