38
4. Press
the
/
buttons until you reach the
screen.
5. Press
the
button.
6. Press
the
/
buttons until you reach the
screen.
7. Press
the
button. You will see the current password and the first number (starting from the left side) will
have a dash ( _ ) under it. The number above the dash is the one that is active and that can be changed.
8. Press
the
/
buttons until you reach the number you prefer. Example
.
9. Press
the
button. This will save the number you have chosen and the dash will move to the next number.
Follow steps #8 and #9 for the remaining numbers. If the dash is under a number that you do not want to change,
press the
button and it will move to the next number.
10. Press the
button twice to exit the programming functions
Set Security Code On The Base Unit
The purpose of the Security Code is to prevent another user with the same Voyager phone system to connect with your
Voyager phone system. For example, someone else has a portable handset, he is using it within the range of your Base
Unit, and he is using the same Security Code as your system. If this person can connect with your Base Unit, he can
make long distance calls or prank calls through your base unit. The Base Unit can only connect with the Portable
Handset if they both have the same Security Code.
Note:
The default Security Code on the Base Unit is a random number. The Security Code of the Base Unit and
Portable Handset from each system is programmed at the factory to match.
You can change the Security Code on the Base Unit by:
1. Press
button on the Base Unit.
2. Press
the
/
buttons until you reach the
screen.
3. Press
the
button.
4. Press
the
/
buttons until you reach the
screen.
5. Press
the
button.
6. Press
the
/
buttons until you reach the
screen.
7. Press
the
button. You will see the current password and the first number (starting from the left side) will
have a dash ( _ ) under it. The number above the dash is the one that is active and that can be changed.
