Operation & Maintenance Manual
──
LG936L Wheel Loader
63
bucket in the desired position.
Lower is used for lowering.
Float is used for moving freely under applied force.
Notice
:
Do not lower the arm at float position.
(2)
Equipment Control Handle
Refer to
1.1 General View of
Controls and Gauges Figure 3-1, Figure 3-2
in this
chapter.
This handle controls the bucket and lift arm. There are four gears
to control the lift, neutral, lower and float of the lift arm pro-and
post, and there are three gears to control the forward tilt, neutral
and rear tilt of the bucket from left to right.
Lift Arm:
Lift is used for lifting.
Neutral is used for maintaining the lift arm in the desired
position.
Lower is used for lowering.
Float is used for moving freely under applied force.
Notice: Do not lower the arm at float position.
Bucket:
Rear Tilt is used for drawing in the bucket
Neutral is used for keeping the bucket in the desired position.
Forward Tilt is used for dumping.
The working device control handle also has the following functions:
Lifting limit location function:
When place the control handle in the lifting position, the
magnetic force from lifting limit location locked magnet coil of pilot valve can lock the
control level in the lifting position; When the lift arm lifts to the highest position, the control
handle turn to neutral position to realize the lifting limit to prevent the equipment from injury
by hydraulic impact.
Set level automatically function:
When dumping in the highest position, move the control
