Volvo SDLG LG936L Скачать руководство пользователя страница 29

Страница: 29 / 130

Operation & Maintenance Manual

──

LG936L Wheel Loader

4.1.3 When Starting the Engine

Before boarding on the machine, check the machine

again to see whether there are people or blockages

on or under or near the machine. If there are

unrelated people in the working area, ask them to

leave. Do not begin work until they leave.

Don’t start the machine if there is the tag of “

NO OPERATION

” on

the control handle of the working equipment or shift control handle.

Sit with the safety belt locked into place.

Know the meanings for all the warnings on the equipment, meters, and

control equipment on the panel.

Be sure the parking brake switch is at the braking position and all the control equipment are in

the neutral position.

Sound the horn for warning.

Start the engine. Please refer to

CHAPTER III – 3.2.2 Starting of Engine

Only start the engine in the cab. Do not start the engine by short circuit. It may destroy the

machine if it is started from side short circuit. This is very dangerous.

4.1.4 Check after Starting the Engine

Check after the engine is started to make sure there is no potential danger.

When examining the machine, park the machine in a spacious place, and do not let unauthorized

people to get close.

Check whether the engine runs with an abnormal sound or shaking. If so, there may be some

malfunctions; report to the manager immediately. Operate the machine after the malfunctions are

eliminated.

Test the control of the engine speed in the neutral gear.

Examine the gauges, meters and warning lamp; be sure they are in the normal working range.

Operate the control mechanism for the gears. Make sure the front, middle and rear gears are in

Содержание SDLG LG936L



































































































































Результаты поиска

Содержание SDLG LG936L

Отзывы:

Похожие инструкции для SDLG LG936L

Бренды по названию

Популярные бренды

Volvo SDLG LG936L, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание SDLG LG936L

Отзывы:

Похожие инструкции для SDLG LG936L

Бренды по названию

Популярные бренды