12
•
Remove orange stoppers from module. Add
manifold/T-junction to center of module
using stem adapter.
•
Rotate the module so the red terminal is on
the left and the black terminal is on the right,
when facing the water side of the electrical
cabinet.
•
Push the module on the frame up against the
stoppers.
Modules weigh 23 kg (50.7 lbs.)
and the system 17 kg (37 lbs.). It is
recommended to wear safety shoes during
installation.
•
If done correctly, the module inlet (the
connection that is NOT in the middle of the
module top) will be facing outward from the
system, and the edge of the module will be
in line with the edge of the frame.
•
The vertical tube that is attached to a T-
junction should be pushed into the module
outlet. If placed correctly, pulling on the tube
firmly should not disconnect it from the
module.
•
The tubing that comes from the waste line
(above the center of the module) should be
pushed into the vertical connection coming
from this point.
Module
Manifold
Electrical
terminals
Содержание DiUse
Страница 1: ...DiUse Owner s Manual Installation and Operation...
Страница 33: ...32 P ID...
Страница 34: ...33 PROCESS FLOW DIAGRAM...
Страница 35: ...34 DIUSE INSTALLATION PFD...