Voltea DiUse, Руководство пользователя

Страница: 19 / 37

18
7 S
YSTEM
S
TART
U
P
- O
PERATION
Power the system up. Using the buttons on the LCD screen, press ENTER to go from Voltea DiUse to
IDLE-START. Press ENTER again to start operation.
NOTE: It may take up to 8 operational cycles for the unit to adjust and output water of the desired quality.
NOTE: If the system is not reaching target pure conductivity, a flow restrictor change may be necessary.
Voltea or a trained reseller can assist with choosing the best option for the specific conditions.
When operating for the first time, it is advised to fill the tank while the connection to the application (2) is
closed, this can take several minutes depending on the pure flow rate. The inlet valve (1) should remain
open. When the tank is full, and system is in
WAIT mode you can open valve 2.
8 S
YSTEM
C
ONTROL
T
HROUGH
LCD
The system can be controlled using the LCD screen
and the keypad. Navigate through the screens using
the UP
and DOWN buttons, confirm selection with
ENTER, and return to the previous screen by
pressing ESC.
NOTE: If the screen is blank, unresponsive or
flickering for more than 2 seconds, please contact
Voltea.
1
2