Vivax Metrotech FLS-2, Руководство пользователя

Страница: 43 / 58

™
Page 37 of 49
11 Remote Transmitter Control by Telephone Line
11. Remote Transmitter Control by Telephone
Line
You can use any touch-tone telephone (landline or mobile) to control the transmitter
remotely. Table 8-1 lists the telephone command codes for two ways FLS-2 (FLS-2-
TX2W), Table 8-2 lists four ways FLS-2 (FLS-2-TX4W), and Table 8-3 lists 16 ways
FLS-2 (FLS-2-TX16W). After entering the command code(s) sequence, you receive
the indicated voice response(s) confirming the command.
NOTE
The hand-held display screen will show a telephone when
controlling the transmitter with a touch-tone phone.
11.1 FLS-2-TX2W Telephone Remote Control
To control the FLS-2-TX2W remotely from a touch-tone telephone, proceed as follows:
1. Dial the telephone number assigned to the FLS-2 using a touch-tone telephone.
The FLS-2 will generate three beeps when it answers the call.
2. Enter the Station ID assigned to this FLS-2, followed by the * key. This is the login
sequence.
3. Enter the Function Code. See the table below. The FLS-2 confirms all functions
with voice messages.
4. If needed enter the next Function Codes.
5. Hang up (log out) the phone by pressing the # key.
6. Disconnect your telephone call.