Vivax Metrotech FLS-2, Руководство пользователя

Страница: 24 / 58

™
Page 18 of 49
7 First Time Installation and Setup
7. First Time Installation and Setup
7.1 Installation Types
The Install menu has two options:
• Select Install for a new installation, a new telecom line connection, or if the line
changes. The Install sequence displays the hardware status followed by 10 steps.
• Select Reinstall to reinstall the system in two steps. See section 7.3 for more
information on when to perform a reinstall.
NOTE
After entering the Install sequence clicking the Prev and Abort
buttons will return to the Main Operating Screen.
7.2 Performing a New Installation
When the transmitter is powered on for the first time, the below Unit is not installed
screen will appear.
1. Click Install to start the installation process. The first part of the installation is for
the transmitter to run a hardware check on itself.
FLS-TX2W
Main
8/10/2021
01:43 AM
Install ShDn
Unit is not installed.
Figure 7-1 Unit not installed screen
2. Click Next after the Check Hardware process has run.
FLS-TX2W Check Hardware
8/10/2021
01:43 AM
Abort Next
Control Module
Display Module
DSP Module
Fan Module
System Temperature
Number of Signals
Boot Count
Customer
Rev2 BB
OK
OK
OK
32.5 C
3
108
General
Figure 7-2 Check Hardware screen
3. Enter a Station ID number and click next. Enter a Station Name and click Next .