Vivax Metrotech FLS-2, Руководство пользователя

Страница: 16 / 58

™
Page 10 of 49
5 Overview
5. Overview
This chapter contains the following sections:
• Operating Modes
• Methods for Controlling the Transmitter
• Hand-Held Display Unit
• Overview of the Modules
• LED Status Indicators
5.1 Operating Modes
Table 5-1 list the transmitter’s operating modes. You can trigger the modes locally and
remotely.
NOTE
The term “local control” refers to the hand-held display unit in
this document. “Remote control” refers to using a touch-tone
telephone, mobile device or Ethernet.
Mode Description
Active Normal operation
Standby
In Standby mode, the high-voltage circuit on the Power
Amplifier module and the output signal is off.
Table 5-1 FLS-2 Transmitter Operating Modes
5.2 Controlling the Transmitter
Figure 5-1 shows the various methods for controlling the transmitter. See Chapter 7,
“Local Transmitter Control,” and Chapter 8, “Remote Transmitter Control, for details.”
FLS
Transmitter
Display
RJ11 (Modem)
Hand-held
Display Unit
Touch-tone
Telephone
RJ45 (Ethernet)
PC or smart-phone
browser
Figure 5-1 Method of Controlling the Transmitter