Vivax Metrotech FLS-2, Руководство пользователя

Страница: 30 / 58

™
Page 24 of 49
8 The Hand-Held Display
1. Network 5. Utilities
2. Factory Menu 6. Login Setup
3. Factory Reset 7. Software Update
4. Output Control 8. About
8.2.1 Network Configuration
The transmitter can use DHCP or Static IP protocols.
A. DHCP IP Address Setup
From the Settings Menu click on the Network icon and a screen similar to the below
Network Config screen will appear if the unit is already connected to an activated
Ethernet port.
1. To set up DHCP click on the DCHP field and the DHCP field will change from
Off to On.
Figure 8-4 Clicking on the DHCP Field turns DHCP on or off
2. Click on the Setup icon to send this network setting to the transmitter hardware.
3. Press the YES button on the below screen.
Figure 8-5 Save the DHCP Settings
B. Static IP Address Setup
1. From the Settings Menu click on the Network icon and the below Network Config
screen will appear. Choose Off in the DHCP field.
Figure 8-6 Network Conf Screen