Vivax Metrotech FLS-2, Руководство пользователя

Страница: 41 / 58

™
Page 35 of 49
9 Operating the FLS-2 Transmitter
FLS-TX2W
Mode
8/10/2021
01:43 AM
OK Cancel
LS ON
SD512
SD640
8k
SD640
Figure 9-5 Select Mode
3. Press the OK button to return to the Main Operating Screen.
9.3.3 Setting a Timer
1. From the Main screen, click Timer .
FLS-TX2W Set Timer (hours)
8/10/2021
01:43 AM
OK Cancel
1
2
3
Figure 9-6 Set Timer (Hours)
2. Use the scroll wheel to select the hours for the FLS-2 to operate.
3. Select
OK
to confirm the selection.
9.3.4 Setting Alarm Levels
1. To access the
Alarm Levels
settings, go to
Settings > Output Control > Alarms
.
Figure 9-7 Alarm Menu and Line Alarm Levels
2. Program each alarms current value by doing the following:
a) Click the alarm type (Min-Max)
b) Click the double (greater change) and single (smaller change) arrow icons to
set the value.
c) Click
OK
to save or
Cancel
to exit without saving.
NOTE:
by default, the unit will set a 20% alarm level at 20% above and below
the installed output current.