Option
Instructions
Pressing
during the testing process will display details of each device that has not
yet been tested. The KP-250 PG2 reads the device number, followed by the device type (for
example, Contact Sensor, Motion Sensor or Keyfob) and followed by the device location. At
this stage, pressing any one of the following keys will open the following options:
1.
Press
to view details of the next untested device.
2.
Press
to exit the test process.
During testing, you can also check the signal strength indication of each device, (for
further details, refer to the device Installation Instructions).
After all devices have been tested, the KP-250 PG2 reads "
DEVICE TESTS END
".
E-MAIL TEST
To test emails, proceed as follows:
While in
E-MAIL TEST
, press
to initiate the test.
The following message appears on the screen:
Please wait…
At the termination of the test, the following message appears on the screen:
<Pls chck
MailBox>.
Check the private e-mail inbox to view the sent e-mail.
Note:
1. For test success, the event must first reach the server before the server can send
the email to the user’s inbox.
2. Because a burglary alarm is sent, an alarm event must be configured for reporting
events (see sections
4.6.3 Configuring Events Reporting to Monitoring Stations
and
4.6.4 Configuring Events Reporting to Private Users
).
TEST ONE DEVICE
Select a specific device group you wish to test. For example, Motion Sensors.
Press
to enter the "
TEST ONE DEVICE
" sub menu and use
to scroll
through the device families. Press
to enter the < device family > sub menu. For
example: "
MOTION SENSORS
".
The following screens will appear: "
Xxx:<device name>
"
<location>
Where "
Xxx
" indicates the device number.
If there is no device, the following screen will appear: "
NO EXISTING DEV.
".
Press
to test the selected device. The following screen will appear:
"
Z01 ACTIVATE NOW
".
Walk throughout the site to test the detectors / sensors or press any key of the selected
handheld device to initiate the test.
During testing, you can also check the signal strength indication of each device, (for
further details, refer to the device Installation Instructions).
At the end of the test process the panel will revert to the last selected device group.
CONTACT SENSORS
MOTION SENSORS
GLASSBREAK SENS.
SHOCK SENSORS
84
D-306919 KP-250 PG2 Installer’s Guide
