Visonic KP-250 PG2 Скачать руководство пользователя страница 65

Страница: 65 / 104

3.8.2 Record Speech

You can record short-duration speech messages for the house identity, user names and custom zone names.

For the recording procedure follow the instructions below. Additional details and guidance are provided in section 3.2.

06:CUSTOM NAMES

⋅⋅⋅

RECORD HOUSE ID

Enter "

RECORD SPEECH

", select the menu you wish to perform (see guidance above), and then refer to the tables

below which provide you with detailed explanations for each option.

Option

Instructions

RECORD HOUSE ID

You can record a message to be announced automatically when events are reported to
private telephones.

While in "

RECORD SPEECH

", press

; the display now reads "

RECORD HOUSE



REC-<2> PLAY-<5>

" (this means, press the

button to record and the

button to play recording through the PowerMaster-30 G2 control panel or external voice
box).

To initiate the recording procedure, press the

button continuously to record your

message; "

RECORD A MSG

" appears momentarily and then changes to "

TALK NOW



( ) 0%. A progress indicator will be displayed that is incremented each
time by 25%, as follows: 0%, 25%, 50%, 75%, 100%.

At the end of the recording process, the KP-250 PG2 will display the following:
"

RECORDING ENDED

". Release the

button.

Note:

To check the recorded message, press the

button and listen to the playback

through the PowerMaster-30 G2 control panel or external voice box.

To advance to the next stage in the recording procedure; from the "

RECORD

HOUSE ID

" menu, click

; the display

will change to “

RECORD USER NAME

”. Press

to proceed.

Option

Instructions

USER VOICE 23

You can record ten user names and assign them to users 23-32. In case of event, the
relevant user name will be added to the message that will be reported via the telephone.
Record user names for 23-32; the procedure is identical to the "

RECORD HOUSE ID

recording procedure described above. Click

to navigate between user name

numbers.

To advance to the next stage in the recording procedure; from the "

RECORD

USER NAME

" menu, click

; the

display will change to “

RECORD ZONE NAME

”. Press

to proceed.

Refers to Powermaster-30 G2 with voice option.

D-306919 KP-250 PG2 Installer’s Guide

Содержание KP-250 PG2









































































































Результаты поиска

Содержание KP-250 PG2

Отзывы:

Visonic KP-250 PG2, Руководство по установке, Страница: 65 / 104

Результаты поиска

Содержание KP-250 PG2

Отзывы: