HDR-5000 User and Technical Manual
3
Figure 1-3. Typical HDR-5000 Configuration
The firmware also provides a Web server that you can access from a PC or laptop computer if both the
receiver and the computer are connected to the same Local Area Network (LAN). See
Chapter 3,
Operating the HDR-5000
, for more information.
You can operate the receiver in one of several factory-set frequency bands: 2 or 6 GHz. The operating
frequencies depend on the frequency of the block downconverters used in the receiver system. Vislink
has a range of block downconverters and antennas designed for each frequency range.
Contact Vislink to select the proper BDCs for your receive site, including your legacy antennas, where
feasible.
1.2 Front and Rear Panel Layout
Figure 1-4
and
Figure 1-5
show the layout of the controls, indicators and connectors on the front and rear
panels of the HDR-5000.
The HDR-5000 is typically mounted in a 19-inch (48.3 cm) rack. The unit and cabling are permanently
installed and power comes from facility power.
For information about installing the HDR-5000, see
Chapter 2,
Installing the HDR-5000
.
Содержание HDR-5000
Страница 6: ......
