HDR-5000 User and Technical Manual
39
5.2 Front
Panel
Connectors
The following sections describe the HDR-5000 front panel connectors.
Figure 1-4
shows the front panel
connectors.
5.2.1 USB Connectors
The following table shows pin-out information for the USB 2.0 connector.
Connector
Pinout
Name
Signal Description
1 2 3 4
1
VCC +5
VDC
2
D- Data
-
3
D+ Data
+
4
GND
Ground
5.2.2 Ethernet Connector
The following table shows the pin-out information for the RJ-45 Ethernet connector, which lets you
connect the receiver to a computer and use the receiver’s Web browser interface to control the receiver.
Connector
Pinout
Signal Description
Pin 5.3 Out
Signal Description
8 1
1
TX+
5
not used
2
TX-
6
RX-
3
RX+
7
not used
4
not used
8
not used
5.3 Rear Panel Connectors
The following sections describe the HDR-5000 back panel connectors.
Figure 1-5
shows the rear panel
connectors.
5.3.1 Block Downconverter (BDC) Connectors
The BDC block downconverter connectors provide the UHF inputs from the downconverters and their
corresponding antennas to the receiver. For all BDC connectors, the signal carries on the center contact,
and voltage to the block downconverters carries on the outer ring as shown in the figure.
BDC Connector
Pin
Description
Pin Signal
Ring
Ground
Содержание HDR-5000
Страница 6: ......
