Vislink HDR-5000, Руководство пользователя и техническое руководство

Страница: 43 / 47

HDR-5000 User and Technical Manual 37
4.3 Resolving Audio Problems
The following table describes suggested actions to audio problems.
Problem Possible Cause Suggested Actions
No audio at studio/
command center. 
No audio input.

Loose or disconnected audio cables.

Audio on transmitter turned off.

Check the audio source.

Verify with the remote crew that the
audio cables are securely connected
to the transmitter.

Verify audio is turned on within the
transmitter.
Audio received at
studio/command
center at a very low
level. A microphone level signal is being
transmitted. Verify that the transmitter’s audio outputs
are at a line level.
4.4 Resolving General System Problems
The following table described suggested actions to general system problems.
Problem Possible Cause Suggested Actions
Cannot connect to
the web server.
Receiver is powered down or
disconnected from the network. Verify that the receiver is powered up and
that it is connected to the network.
Receiver IP address is incorrect. From the Control screen, select use the
arrow buttons and select the
IP Address
configuration, as described in Section 3.2:
Using the Front Panel Control Screen
and
enter the correct IP address.
Receiver does not
power up.
Power cable not connected. Verify that the power cable is fully
connected at both ends.
1. Set the power switch to off and remove
the power cable from the receiver.
2. Remove the top cover and check the
power supply fuses with the power
cable disconnected. Upon confirmation
of functional fuses, reconnect power
cable.
3 S t th it h t ON