Visionis VIS-3013, Руководство пользователя

Страница: 92 / 156

Fingerprint Access Control Terminal User Manual
78
4. Edit the door or floor parameters.
Note
● The displayed parameters may vary for different access control devices.
● Some of the following parameters are not listed in the Basic Information page, click More to
edit the parameters.
Name
Edit the card reader name as desired.
Door Contact
You can set the door sensor as remaining closed or remaining open. Usually, it is remaining
closed.
Exit Button Type
You can set the exit button as remaining closed or remaining open. Usually, it is remaining
open.
Door Locked Time
After swiping the normal card and relay action, the timer for locking the door starts working.
Door Open Timeout Alarm
The alarm can be triggered if the door has not been closed in a configured time period. If it is
set as 0, no alarm will be triggered.
Super Password
The specific person can open the door by inputting the super password.
Extended Open Duration
The door contact can be enabled with appropriate delay after person with extended access
needs swipes her/his card.
Duress Code
The door can open by inputting the duress code when there is duress. At the same time, the
client can report the duress event.
Dismiss Code
Create a dismiss code which can be used to stop the buzzer of the card reader (by entering
the dismiss code on the keypad).
Note
● The duress code, super code, and dismiss code should be different.
● The duress code, super password, and the dismiss code should be different from the
authentication password.
● The length of duress code, super password, and the dismiss code is according the device,