Vision 2310b, Инструкция по эксплуатации, Страница: 33 / 48

30
PANIC MODE
Panic Mode allows you to trigger the full siren blast
from your remote, whether the system is armed or
disarmed. Press Button-1 or Button-2 or Button-3 for
3 seconds. (Note that Button-2 initiates “ Silent Panic ”
which will flash vehicle lights but no siren will sound.)
When you release the button, vehicle lights will flash, the
Status LED will flash quickly, and the siren will go off for 30 seconds (siren
will not go off if you pressed Button-2) . You can exit Panic Mode (and
silence the siren) any time after you initiate Panic Mode by pressing
any button.
OPERATION
HIGH SECURITY DISARM
When the system is “triggering” (warning
chirps, siren blast, light flash),
two presses
of the transmitter are required to disarm.
This feature allows you to stop the trigger con-
dition with only 1 press while keeping the system armed.
You can press Button 1 or 2 or 3. Your first press stops the
trigger (kills the siren, or kills only light flash if in Silent Mode). And a
second press disarms the system.
GENERAL Operation
Push Any
Button
Push Any
Btn. for 3 sec.
DIRECT DOOR LOCK
Pressing Button-2 & Button-3 at the same time for a short
duration will lock or unlock the doors without Arming or
Disarming the security system. This feature can be useful
if someone is inside the vehicle and you temporarily leave
the vehicle and secure it but keep the siren from acciden-
tally being triggered by the passenger inside. Never use
this feature to leave unattended children in a vehicle!
This feature only works when the 2310 is
Disarmed
. If you press Buttons 2
& 3 while the system is Armed, the security system will Disarm. And if you
lock doors with this feature and later try to Arm, the doors will unlock and
the system will be Disarmed—a second press will then be required to Arm.
Push Buttons
2 & 3