Vision 2310b, Инструкция по эксплуатации, Страница: 32 / 48

VISION 2310B INSTRUCTION MANUAL
29
GENERAL Operation
DISARMING
NORMAL METHOD
This method is the typical way to disarm the 2310,
with confirmation chirps active.
Press Button-1 on the
transmitter while the system is armed. The doors will
then unlock and vehicle lights will flash 3 times (if so in -
stalled). The Status LED will turn off and the siren will
chirp 3 times. The system is now disarmed, and you may
enter the vehicle without triggering the siren.
Push Button-1
AUTO-REARM
This method of arming is disabled by default — see page 34 for pro-
gramming details
.
This feature automatically arms your system 60 sec-
onds after it is disarmed. (If a door is opened during the sixty seconds, the
2310 will not automatically rearm.)
NOTE: Doors
will be locked
, unlike Auto Arm.
NOTE:
During the 20 second Auto Arm delay or the 60 second Auto Re-
arm delay, the siren cannot be triggered because the system is not yet armed.
TIP:
Vehicle lights will illuminate solid for 30 seconds upon disarming
if Exterior Illumination is enabled (see page 34).
NO-CHIRP METHOD
This method of disarming is identical to the
“Normal” method except there are no si-
ren chirps emitted after you disarm.
Press
transmitter Button-2 or Button-3 then release.
The doors will then unlock and vehicle lights will flash 3
times (if so installed). The Status LED will turn off and
the siren will chirp 3 times. The system is now disarmed, and you may
enter the vehicle without triggering the siren.
Push Button
2 or 3
NOTE: To disarm without the remote, see page 37.
PROGRAMMABLE