Vision 2310b, Инструкция по эксплуатации, Страница: 25 / 48

22
VISION 2310B INSTRUCTION MANUAL
MOUNTING SYSTEM COMPONENTS
The Status LED is used as a visual theft deterrent when the system is
armed. It also is used to alert the user if the siren went off in their ab-
sence, as well as for feature programming.
Ask the vehicle owner where the Status LED should be placed. If they
have no particular preference, suggest a location near the door window on
the driver’s side where it can be easily seen (e.g., on a switch blank ). Drill
a 8.0mm (0.31in.) hole to mount and run the wires out of view.
Status LED
Find a location in the engine compartment (such as the firewall) that is far
from heat sources or moving parts such as belts or the radiator fan. Locate
a bolt or bolt hole for securing the siren mount; otherwise, you will need
to drill holes and use self-tapping screws. Mount in a place that will not
be splashed excessively with water! And remember that the siren will be
1-tone until you cut the blue loop wire, which enables 6-tone sound.
Siren