Viessmann Vitodens 333-F, Инструкция по эксплуатации

Страница: 48 / 136

Coding in the delivered condition Possible change
Level A1/M2
d4:0 Heating curve level = 0
(only for weather-com-
pensated control units) d4:
–
13
to
d4:40
Heating curve level ad-
justable from
–
13 to 40
(see page 38)
Code 2
Calling up code 2
Note
& On weather-compensated control
units, codes are displayed as plain
text.
& Codes that are irrelevant due to the
system equipment level or the set-
ting of other codes will not be dis-
played.
Press the following keys:
1.
L
+
G
simultaneously for
approx. 2 s.
2.
d
to confirm.
3.
a
/
b
for the required coding
address; the address
flashes.
4.
d
to confirm; the value
flashes.
5.
a
/
b
for the selected value.
6.
d
to confirm; the display
briefly shows
"
accepted " (for
weather-compensated
control units); the
address flashes again.
7.
a
/
b
for the selection of
further addresses.
8.
L
+
G
press simultaneously for
approx. 1 s; code 2 is
terminated.
The coding addresses are grouped
according to the following
function
areas . The respective function area is
shown on the display.
The areas are scanned in the follow-
ing sequence with
a
/
b
:
Function area Coding ad-
dresses
System design 00
Boiler/burner 06 to 54
DHW 56 to 73
General 76 to 9F
Heating circuit A1
(heating circuit
without mixer) A0 to Fb
Heating circuit with
mixer M2 A0 to Fb
Code 1
(cont.)
48
Coding
56
92
682
GB