background image

SPECIFICATIONS

WARRANTY CARD

Seller’s seal and signature

Product name:

 

     M1021B             M1021W

   

..........................................................................

                                

    Date of sale

1. Wena Company shall grant a warranty for the purchase of your product for a period of 24 months 
    from the date of its purchase as shown on the present Warranty Card and the purchase document. 
2. Product defects found during the warranty period shall be repaired free of charge within 21 working 
    days from the date of acceptance of your product at the service centre. 
3. The user has the right to replace the product with a new one if; 
    > four major repairs have been conducted during the warranty period and the product is still defective; 
    > when it is established that an unrecoverable defect has occurred. When replacing the product with 
       a new one, the equivalent of items (including packaging) which are missing or damaged by the user 
      as well as the cost of their replacement shall be deducted. 
4. The user shall deliver the defective product at its own expense to the service centre. 
5. The warranty shall not cover the deterioration of the product quality caused by standard wear and 
    tear and in the following cases: 
    > the product has been used improperly or inconsistently with the product operating instructions; 
    > the product has been used or left in improper conditions (excessive humidity, too high or low 
       temperature, sunlight, etc.), maintenance and operational condition which are different from the 
       ones specified in the product operating instructions; 
    > mechanical, chemical and thermal damage; 
    > damage caused by external forces, e.g. overvoltage in the electrical network, atmospheric 
       discharges, flood, fire; 
    > damage resulting from improper installation, improper storage of the device or repairs conducted by 
       any unauthorised persons; 
    > damage due to incorrect voltage connection. 
6. The guarantee shall cease to be valid as a result: 
    > breakage or damage of warranty seals; 
    > connection of additional equipment, other equipment than the one recommended by the product 
       manufacturer; 
    > modifications and structural changes to the product and repairs conducted beyond the Wena 
       service centre; 
    > the Guarantee Card or serial number have been changed, blurred or obliterated. 
7. The Guarantee Card shall be valid only with the entered date of sale confirmed by the seller's seal 
    and signature. 
8. The condition to perform repair works is to deliver the Product with the Warranty Card and the proof 
    of purchase. 
9. Service Centre:
Firma Handlowa Wena
Al. Jerozolimskie 311 , 
05 - 816 Reguły / near Warsaw
Poland 
tel. +48 228 370 286; +48 228 174 003 
e-mail: 

[email protected]

www.vidos.pl

Power supply:  

 

 

DC 20~28V 

Power consumption: 

 

Standby 0.29W; Working 7W

Communication: 

 

 

Hands-free

Screen:   

 

 

7 Inch digital color TFT

Display Resolutions: 

 

800

3(R, G, B) x 480 pixels

Video signal: 

 

 

1Vp-p, 75

Ω

, CCIR standard

Mounting:  

 

 

Surface wall-mount

Color: 

 

 

 

White,Black

Wiring: 

 

 

 

2 wires, non-polarity

Dimension: 

 

 

132(H)×226(W)×18(D)mm

Memory card:                                           micro SD max 32GB

Internal memory:                                     100 photos

Recording movies:                                   Yes

The amount of ringing melody:                20

Working temperature 

                               0

 °

C ~+40 

°

                               

Available colours                                      black/white

32

33

7" VIDEO HANDS-FREE COLOR TFT MONITOR

Содержание duo M1021



































Отзывы: