11
10
BASIC OPERATIONS
Adjusting the speaker volume
Adjusting images
Adjusting screen&volume
Total 4 scene modes can be selected in sequence:
Normal, Brightly, Soft and User
.Whichever
mode you choose, there will be a corresponding value for contrast,brightness and color.
You should know that the contrast,brightness and c olor can be modifi ed freely, but this action
should be at the
User
scene mode.
Volume can be adjusted at any time.
Adjusting range: 0 (mute), 1 - 9.
Adjust the contrast of the screen,the range is 0~9. Touch
-
or
+
to change the level.
Adjust the brightness of the screen ,the range is 0~9. Touch
-
or
+
to change the level.
Adjust the color of the screen,the range is 0~9. Touch
-
or
+
to change the level.
Touch
-
or
+
to reach desired level.
00:10 DS-1
00:10 DS-1
Normal
Brightly
Soft
User
Note:
The adjustments have no effect on the recorded images.
While receiving a call from door station, or monitoring /communicating withh et visitor,you can
adjust the screen and speaker volume. Follow the steps:
BASIC OPERATIONS
Calling monitors in the same room -
non addressed intercom(Inner Call)
Door release
Intercom - calling other monitors
It is available to release the door during a call i n , communication,or while monitoring a door
station.
00:10 DS-1
1
Touch either
or
icon on the screen
or press
UNLOCK
button
on panel
to
release door. The door lock is released for
the set door release time.
(if two locks are connected to door station,
touch
icon to release the second lock.)
00:10 DS-1
Select [INTERKOM] in the main menu to open the internal connections menu.
The intercom feature lets you to make connections in-between monitors.
The DUO system recognises two types of such connections, depending on the addressing method.
Internal non-addressed intercom (systems for up to 4 internal units and multi-user systems)
In order to make such a connection, you need to set the same address on all your monitors and uniphones.
4 is the maximum number of internal units for this type of connection.
In addition, you have to specify their operation:
First monitor - MASTER => further 3 - SLAVE1 / SLAVE2 / SLAVE3
The connection is made to all of them at the same time. When you receive a call, all other monitors will
be switched off. If no call is made within 30 seconds, the connection will be terminated automatically.
IMPORTAN!
To connect with the monitors in this way, all of them must be set to the same address.
Calling other monitors in the same system
- addressed intercom(Name list call)
This type of connection can be made in-between monitors at one house or at individual places within
one building system.
