12
13
BASIC OPERATIONS
Calling the guard monitor
A Monitor can be assigned as Guard Unit Monitor; w h en the Guard Unit Monitor answers the
call, conversation with the guard person is started..
You can monitor the entrance at any time via the monitor.
1.Touch anywhere of the screen on monitor in standby mode.
2.Touch
[MONITOR]
icon on main menu page to enter
Monitor select
page.
*Note: Press
TALK/MON
button on panel in standby mode to monitor the master door station in shortcut.
Monitoring door stations/cameras:
• DS1~4 and CAM1~4 can be selected to monitor individually if the system installs multi door
stations/cameras.See the following steps:
[ 01 ] Jim
[ 02 ] Calo
[ 03 ] Jack
[ 04 ] Philips
[ 05 ] Hebe
[ 06 ] Tony
Name List
Monitoring
00:10 DS-1
00:10
00:10
00:10
00:10
00:10
00:10
00:10
00:10
D
D
D
S-1
S-1
S-1
Monitor Select
DS-1
DS-2
DS-3
CAM-1
DS-4
CAM-2
00:10 DS-1
* During monitoring, images can be viewed, but audio cannot be heard.
* If there is a visitor at the entrance, touch
icon on screen to begin communication with
door station.
BASIC OPERATIONS
Recording
3.To end monitoring
Touch
icon on the screen or press
TALK/MON
button on panel.
* Monitoring also ends automatically after 30 seconds.
Video Quard Monitoring:
If the system installs multi cameras via QSW.
Video quad monitoring
is available.
• On
Monitor select
page,
touch “
>
“ icon to scroll next page.
• Select “
QUAD-1
” item to activate video quad monitoring, see the following steps:
Available functions during monitoring(not including video quad monitoring)
• Pantilt & zoom
• Adjusting images(image scale/bright/color/contrast)
• Door release
• Volume control
• Manual recording
Videos and images are possible to be recorded, both automaticr ecording and manual record-
ing are available.
00:10 DS-1
REC
Blinks
Automatic recording
• Recording starts after 3 seconds while
receiving a call.
• While recording, “ REC” blinks on the
screen.
• Capture one picture automatically for
each calling.
00:10 DS-1
00:10
00:10
00:10
00:10
00:10
00:10
00:10
00:10
D
D
D
S-1
S-1
S-1
Monitor Select
CAM-3
CAM-3
CAM-4
CAM-4
CAM-1
CAM-2
QUAD-1
Monitor Select
DS-1
DS-2
DS-3
CAM-1
DS-4
CAM-2
* During monitoring, manual recording is available.
* Touch each one of video to switch to monitor the corresponding camera Independently.
- You can install up to 13 indoor units at one house (only 1- and 2-user systems). When addressing
them in the range of 00-12 (single-user system) and 16-28 (double-user system), you can make
connections in-between the selected monitors. You can also make an external connection to any other
place if you know the address of its monitor installed there.
- In a building system, each unit is assigned its own individual address, which is set on monitors.
Making use of the list available in the monitor, you can establish a connection with any place you want
knowing the address of its monitor. In this configuration, it is not possible to make an addressed
connection within one user.
IMPORTANT!
To connect to the monitors in this way, all of them must set to different addresses
Once you have selected the address you want,
select to make a call.
Select < or > to view further pages at the list.
Select to give your own name to any specific item.
