Vicon Pilot Select V1566, Руководство по программированию, Страница: 80 / 96

70
•
Video Switch Action XX190-10-XX Pilot Select
Home Recall
Camera stations may be directed to the home position when the system is powered or rebooted, by enabling
the home recall function in this screen. The home position is preset position 01 for all camera stations. Note
that this setting is only onscreen if Action is set to Camera.
Settings: Disabled
Enabled
Keys:
Numeric keypad’s + (plus) key or - (minus) key
Set Camera Partition
The procedure of assigning cameras to monitors is known as partitioning. By default, all cameras are
assigned to all monitors. Video from camera stations may not be displayed on monitors unless the camera
stations are partitioned to those monitors. Monitors are partitioned to keypads, therefore keypads may only
control a camera station if it has been partitioned to a monitor that was in turn partitioned to that keypad.
Menu Path: Main Menu
→
Video Switch Action
→
Set Camera Partition
CAM. VS MON. PARTITION
x / - - ENABLE/DISABLE
, , , - CURSOR CONTROL
ENTR/ESC - STORE/ABORT
CAMERAS FOR MON. : 01
001
007
013
019
005
011
017
023
004
010
016
022
003
009
015
021
002
008
014
020
006
012
018
024
000: ENABLE, : DISABLE
Cameras For Monitor
The monitor number is identified in the Cameras For Monitor setting. Enabling the cameras partitions them to
the monitor. Disabling the camera removes it from the partitioning table for the selected monitor. After defining
the monitor number, press the Tab key to move to the partitioning table.
Settings:
01 to 64
Keys: Numeric keypad’s + (plus) key or - (minus) key
Tab key to move from Cameras for Monitor setting to partitioning table