Vicon Pilot Select V1566, Руководство по программированию, Страница: 14 / 96

4
•
Required Connections XX190-10-XX Pilot Select
Preliminary Operations Required
to Program the System
Required Connections
You must connect a keyboard and monitor to the Pilot Select and power it in order to program the Pilot Select.
To make the connections to the Pilot Select, refer to Figure 7 and proceed as follows:
Figure 7: Pilot Select Card Cage, Programming Connections
1. Connect a PS/2 keyboard to the PS/2 keyboard connector on the front panel.
2. Connect a composite monitor to the MONITOR EXPANDER connector on the rear panel.
3. Connect power cord to 3-prong receptacle.