Vicon Pilot Select V1566, Руководство по программированию, Страница: 49 / 96

XX190-10-XX Pilot Select Alarm Actions
•
39
Sequence
Alarm monitors may be set to sequence multiple active alarm video or to display an alarm steadily until
acknowledged, in the order determined in
Alarm Input Order (Common Stack Only) or Alarm Order
(Independent Stack Only)
. Choose Enabled to sequence the video from multiple active alarms on the alarm
monitor specified at the top of the screen.
Settings: Disabled
Enabled
Keys:
Numeric keypad’s + (plus) key or - (minus) key
Default: Disabled
Dwell Time
Alarm monitors may be set to sequence the video from multiple active alarms. If sequencing is enabled, the
dwell time must be set for the alarm monitor specified at the top of the screen. The dwell time is the length of
time that alarm video will display before being replaced by video from the next alarm in the alarm monitor
stack. The dwell time must be long enough to allow the pan-and-tilt drive to move to the preset position and
be viewed before the sequence proceeds to the next alarm.
Settings:
001 to 240 seconds
Keys: Numeric keypad’s + (plus) key or - (minus) key to increment/decrement by 1 second
Shift and numeric keypad’s + (plus) or - (minus) key to inc/dec by 10 seconds
Auto Acknowledge
Alarms may be acknowledged manually or automatically. If Auto Acknowledge is Enabled, an alarm will
display until the acknowledge time passes, then the alarm will be automatically acknowledged by the system.
Manual acknowledgment by a user is required if Auto Acknowledge is Disabled. Refer to
Models V1300X-
DVC and -RVC Intelligent Remote Control Panels Instruction Manual X777
for manual acknowledgment
procedures
.
Settings: Disabled
Enabled
Keys:
Numeric keypad’s + (plus) key or - (minus) key
Default: Disabled
Acknowledge Time
The acknowledge time is the length of time that alarm video will display before being automatically
acknowledged by the system. Acknowledgment removes the alarm from the alarm monitor stack. This setting
is unavailable if Auto Acknowledge is set to Disabled.
Settings:
001 to 255 seconds
Keys: Numeric keypad’s + (plus) key or - (minus) key to increment/decrement by 1 second
Shift and numeric keypad’s + (plus) or - (minus) key to inc/dec by 10 seconds