Vicon Pilot Select V1566, Руководство по программированию, Страница: 35 / 96

XX190-10-XX Pilot Select Keypad/Receiver
•
25
Baud Rate
The baud rate is the speed of data transfer between the receiver and the system. The baud rate specified at
the receiver and on this programming screen must agree. At the receiver, baud rates are set using the
appropriate DIP switch on a printed circuit board. Refer to the appropriate receiver instruction manual to set
the DIP switch or determine the current setting.
Caution: Select the same baud rate for all receivers in the system.
Settings: Disabled
600 BPS
4800 BPS
9600 BPS
Keys: Numeric keypad’s + (plus) key or - (minus) key
Default: 4800 BPS
Receiver Model
Specify the model number of the receiver. Select Undefined if the model number is unknown. The Vicoax
setting is for future use. The V1300R should be selected for both V1300R and V1301R model receivers.
Choose the V1300R-PV model number for the V1300R or V1301R receiver with the variable-speed option
board installed.
The V1200R-LM receiver supports eight individual camera stations, each of which has its own receiver
address. The system allows the receiver delay time to be set individually for each receiver in the system. The
delay time must be set for each receiver address (receiver number) represented by the V1200R-LM. For
example, if the receiver numbers for the V1200R-LM are 21, 22, 23, 24, 25, 26, 27 and 28, you must set the
communications delay time for each of these receiver numbers. Use 200 msec as the communication delay
time for V1200R-LM receivers.
Settings: V1300R
V1300R-PV
V1310R
V1311R
V1319R
SVFT
Dome
V1319R
Vicoax
Simplex
Undefined
V1200R
V1200R-LM
Keys:
Numeric keypad’s + (plus) key or - (minus) key
Default: V1300R