ViaSat VBM-1400, Инструкция по установке и эксплуатации

Страница: 41 / 81

VBM-1400 Broadband Modulator Installation and User’s Guide
Initial Set Up and Configuration
Rev. 002 1018360
3-7
3.3.4.3.2 Clock
Additional clock parameters are displayed and/or set using the CLOCK
MENU as described in the following paragraphs.
3.3.4.3.2.1 Time
From the TIME menu, observe the current Time.
3.3.4.3.2.1.1 Edit Time
Change the time settings by pressing the ENTER key, and using the
cursor keys, change the setting as desired. When the desired setting is
shown on the display, press the ENTER key again to enter the
parameter into memory.
3.3.4.3.2.2 Date
From the clock DATE menu, observe the current Date.
3.3.4.3.2.2.1 Edit Day
Change the day setting by pressing the ENTER key, and using the
cursor keys, and numeric keys, change the setting as desired. When
the desired setting is shown on the display, press the ENTER key again
to enter the parameter into memory.
3.3.4.3.2.2.2 Edit Month
Change the month setting by pressing the ENTER key, and using the
cursor keys, change the setting as desired. When the desired setting is
shown on the display, press the ENTER key again to enter the
parameter into memory.
3.3.4.3.2.2.3 Edit Year
Change the year setting by pressing the ENTER key, and using the
cursor keys, and numeric keys, change the setting as desired. When
the desired setting is shown on the display, press the ENTER key again
to enter the parameter into memory.
3.3.4.3.3 Temperature
Displays the current temperature of the RF Board and Modulator
Board.
3.3.4.3.4 Reset
The Soft Reset menu is accessed using the RESET MENU as described
in the following paragraph.
3.3.4.3.4.1 Soft Reset
Forces a modulator warm boot. To reset the modulator press the
ENTER key twice from the Soft Reset MENU.
3.3.5 Front Panel Parameters
Front panel (FP) related parameters are displayed and set from the
FRONT PANEL MENU as described in the following paragraphs.
3.3.5.1 Front Panel Backlight Level
If desired, change the FP Backlight setting by pressing the ENTER key,
and using the cursor keys, change the setting as desired. When the