ViaSat Business Hotspots, Руководство по установке

Страница: 10 / 43

Viasat Business Hotspots Installation Guide
Page | 10
Step 4 | Mount indoor AP/s
Each indoor AP provides up to 2,500 sq.ft. of coverage. Install the AP/s at ceiling level as close as possible to
the center of the intended coverage area where the most Wi-Fi users will connect. Determine which mount
type to use: drop-ceiling T-bar, flat surface, or mounting bracket. The AP must be mounted within 300 cable-
feet of the controller. Refer to the
Ruckus Indoor AP installation instructions in this guide for additional
information.
Avoid barriers and signal interference
Mount the AP/s in an area free from obstructions or sources of interference, such as cement/brick, metal
(especially large metal objects), some appliances, analog phones, speakers, etc.
Below are examples of barriers that create interference:
Type of Barrier Interference
Wood, glass or synthetic material Low
Brick, marble, and objects containing water Medium
Cement High
Metal, microwave ovens, A/C units,
cordless landline phones and headsets,
speakers, any device that consumes
large amounts of electricity
Very high
AP LEDs and other elements