ViaSat Business Hotspots, Руководство по установке

Страница: 28 / 43

Viasat Business Hotspots Installation Guide
Page | 28
Step 3 | Mount the AP
1 Snap the AP back onto the mounting bracket (A in Figure 6), and use a medium flat-blade or No. 2
Phillips screwdriver to tighten the captive screw to secure the bracket to the AP (B in Figure 7).
Figure 7: Attaching the mounting bracket to the AP
2
Continue with Step 4: Earth Ground the AP.
Optional | Lock the mounting bracket to the AP
If the mounting bracket needs to be locked to the AP, use a matching security screwdriver to screw the
installer-supplied locking stainless steel 6mm M3 panhead security screw through the mounting bracket and
into the AP chassis.
CAUTION:
Ensure the locking security screw is no longer than 6mm, otherwise it can damage the AP
chassis.
Figure 8: Locking the mounting bracket to the AP
Step 4 | Earth ground the AP
Make sure that earth grounding is available and that it meets local and national electrical codes. Before
completing this step, check your local wiring standards for guidance.
Using the supplied ground wire and ground screw/washer set, connect a good earth ground to the AP chassis
ground point (Figure 8).
The Ruckus outdoor AP includes one 9mm stainless steel M6x1 earth ground screw with split lock and flat
washers.
CAUTION:
Ensure the ground screw is no longer than 9mm, otherwise it can damage the AP chassis.