34
6.2.3
Description of the parameters
Note:
The control unit is used for several types of the VIADRUS boilers, therefore, displays the
settings (e.g. fuel type), which are not intended for this type of the boiler.
Through the menu (start page) and other sub-menus, the names of the parameters or directly the setting lines can
be accessed.
The display of the control unit not always displays all rows at once (depending on the options of the display). The
next line can be accessed by the selection buttons (
▲
/
▼
).
The cursor appears on the first line, which can be changed (e.g. at the start side on the line with date and thereafter
on every other row, which allows the change.
Start page of the control unit:
Keys:
z
imaging parameter (specified value can not be changed)
+
parameter value can be changed
►
move to the second level (by pressing Enter)
z+
imaging parameter - the parameter value can be changed after entering the password
Note:
Text descriptions of individual parameters correspond to displayed on the control unit.
Basic factory settings
The boiler is switched on via an external control and heats to the desired temperature of the boiler. By means of the
service menu (see Manual for the control unit Climatix) and the configuration menu it is possible to set for the
control unit:
Climatix POL 687
•
cascade of up to 4 pcs of boilers
•
SMS server
•
accumulation
•
HW heating
•
heating up to two mixed heating circuits
•
use of the POL 822 device with two-way communication for each heating circuit
•
external control
•
alternative heat source
•
remote access through Internet
Remark:
Provided the cascade configuration is set in the service menu:
•
accumulation will be only possible for the Boiler 1 Master
•
hot water heating-up will be only possible for the Boiler 2, the Boiler 3 and the Boiler 4
•
it is impossible to set a reserve source.
The control unit enables the remote access through Internet.
Climatix POL 423
•
HW heating
•
heating up to two mixed heating circuits
•
use of the POL 822 device with two-way communication for each heating circuit
•
external control
•
alternative heat source
