33
6.2
POL 871 control unit to the Climatix control unit
Control units cannot be used as the room unit.
6.2.1
Placement and connection to the Climatix control unit
Placement
Appropriate placement of the control unit is on the front or side of the fuel tank of the boiler VIADRUS A3W. Part of
the control unit is a magnet in its rear part.
Connection to the Climatix control unit
Part of the control unit is a connecting cable with the network connector. IT IS PROHIBITED to shorten or lengthen
the cable
The procedure for connecting the control unit to the Climatix control unit:
-
Disconnect the boiler from the power supply.
-
Remove the cover of the switchboard which is attached with four screws.
-
Cut through adequately the cable gland ABB for the network connector of the control unit.
-
Pull the cable with the network connector through the cable gland ABB and connect to the input for the power
connector on the Climatix control unit.
-
Install the switchboard cover.
-
Connect the boiler to the power supply.
6.2.2
Control elements
Button
Symbol on
the display
Description
A
i
Quick return to the main menu screen.
B
Display of alarms, including a history of errors.
C
Return to the previous menu (Esc).
D
▲
Move the cursor to the line above or select a higher value when setting the parameters of
the boiler. Hold for an extended period to accelerate the change of the adjusted values.
E
▼
Move the cursor to the line below or select a lower value when setting the parameters of
the boiler. Hold for an extended period to accelerate the change of the adjusted values.
F
Confirm the adjustment of the line or confirm the changed value (Enter).
Fig.
№
. 26
Elements of the POL 871 control unit
A
B
C
F
E
D
