33
Security
PIN2 code
The PIN2 code is used to protect the advanced user functions of your SIM card, for
example, fixed dialing. The PIN2 code must not be the same as the PIN code.
To change the PIN2 code:
1. From the
Home screen
, select
Menu
>
Ctrl. Panel
>
Settings
>
General
>
Security
>
Phone and SIM card
>
PIN2 code
2. Press the Middle select, and when prompted, enter the current PIN2 code, then
select
OK
.
3. When prompted, enter the new PIN2 code, then select
OK
.
4. Enter the new PIN2 code again for verification, then select
OK
. A confirmation
message is displayed.
Keypad autolock period
This function allows you to set the keypad to lock automatically after a defined period.
1. On the
Home screen
, select
Menu
>
Ctrl. Panel
>
Settings
>
General
>
Security
>
Phone and SIM card
>
Keypad autolock period
.
2. Press the Middle select, then either enter a time in minutes for the autolock
period, or select None if you do not want to use this feature.
Phone autolock period
To set a timeout after which the device is automatically locked and can be used only
if the correct
Lock code
is entered. When the device is locked, you can still answer
incoming calls, and calls may still be possible to the official emergency number
programmed into your device.
1. On the
Home screen
, select
Menu
>
Ctrl. Panel
>
Settings
>
General
>
Security
>
Phone and SIM card
>
Phone autolock period
.
2. Press the Middle select key, then enter a number for the timeout in minutes, or
select
None
if you do not want to use this feature.
3. Enter the
Lock code
when prompted.
Lock code
The lock code is used to unlock the device. To avoid unauthorized use of your device,
change the lock code.
To set a new lock code for the phone autolock function:
1. On the
Home screen
, select
Menu
>
Ctrl. Panel
>
Settings
>
General
>
Security
>
Phone and SIM card
>
Lock code
.
2. The preset
Lock code
is 12345. Enter the current code and then the new code
twice. The new code can be 4 to 255 characters long. Letters and digits can be
used, and both uppercase and lowercase letters are accepted.
3. The device notifies you if the
Lock code
is not properly formatted.
Lock if SIM card changed
To lock the phone if you change your SIM card, select
Menu
>
Ctrl. Panel
>
Settings
>
General
>
Security
>
Phone and SIM card
>
Lock if SIM card changed
.
To prevent the use of your device with an unauthorized SIM card, select
Change
>
Yes
. The device now asks for the
Lock code
every time a new SIM card is inserted.
Remote phone locking
To lock your phone though your phone is not with you, select
Menu
>
Ctrl. Panel
>
Settings
>
General
>
Security
>
Phone and SIM card
>
Remote phone locking
.
To enable locking of your phone with a text message, if your phone is lost or stolen
select
Enabled
. Write the locking message. You may need to enter the
Lock code
to change this setting. To use a remotely locked device again, enter the
Lock code
.
NOTE:
The PIN2 code is supplied with some SIM cards. For more
information, contact your service provider.
IMPORTANT:
The PIN2-protected features of your SIM card will be
blocked if you incorrectly enter your PIN2 code a number of times, normally
after three consecutive attempts.
If this happens, you must contact your service provider to obtain the PUK2
(PIN2 Unblocking Key). Enter this into your phone to unblock the PIN2
code and restore your SIM card’s full functionality.