Vertiv Liebert APM 400 Скачать руководство пользователя страница 64

Страница: 64 / 97

User Manual 10H52258UM60 - Rev. 3 - 01/2019

Introducing UPS Operations

APM 400/600

•

Press the F3 (up) or F4 (down) key to select the Password management item. Press the HELP (Enter) key to

confirm. The Password management command changes to Enter Old Password

•

Press the F4 key to move the cursor to the respective password position.

•

Press the F3 key to enter a number between “0” and “9” in this position. Enter 5 digits in this way, and then

press HELP (enter) to confirm. At this stage, the Password management command changes to “Enter New
Password”.

•

Press the F3 and F4 to enter the new password, as described above, and then press the HELP (Enter) key to

confirm. At this point, the Password management command changes to Enter New Password again.

•

Enter the new password again, as described above, and then press the HELP (Enter) key to confirm and save

the changed password. Press the F2 ( ESC ) Key to return to the Output menu.

Содержание Liebert APM 400


































































































Результаты поиска

Содержание Liebert APM 400

Отзывы:

Vertiv Liebert APM 400, Руководство пользователя, Страница: 64 / 97

Результаты поиска

Содержание Liebert APM 400

Отзывы: