Vertical WAVE IP 2500, Руководство по установке

Страница: 169 / 236

Using the Wave Workstation Applications Setup 9
-
7
Chapter 9: Installing ViewPoint and Other Wave Workstation Applications
Wave Server Installation Guide
You can update the station ID at a later time, or you may prefer to wait to install ViewPoint and
the TAPI Service Provider on users’ PCs until you have connected and assigned phones, and can
enter valid station IDs.
To update station IDs at a later time, do either of the following:
• In the ViewPoint Logon dialog, specify a default station ID or a specific station ID
according to the instructions in “Using ViewPoint with a different phone or server” in
Chapter 2 in the
Wave ViewPoint User Guide .
• Re-run the TAPI Configuration Wizard, as described in “Configuring the TAPI Service
Provider” on page 9-10.
To install the Wave workstation applications
1. Log on to the PC on which the workstation applications will be installed as a Windows
LOCAL ADMINISTRATOR (see “Installing as a LOCAL ADMINISTRATOR in
Windows” on page 9-3).
2. Close all open Windows applications.
3. Start the Wave Workstation Applications Setup by running setup.exe, located in the
Netsetup directory on the Wave Server. The default location (based on the IP address of
the Wave Server’s VAM) is:
\\192.168.205.1\Netsetup\setup.exe
Note: You may have changed the default IP address of the VAM as part of initial system
configuration (see “Identifying the Wave Server on your LAN” in Chapter 3 or Chapter 4
(depending on your Wave Server model).
If you are installing workstation applications on a PC running Windows 7 :
Right-click setup.exe and then click
Run As Administrator
. If you are requested to enter
security credentials to proceed as an administrator at this point, do so. When a security
warning is displayed, click
Yes
to continue.
4. When prompted by the InstallShield Wizard, choose the appropriate language to use for
this installation, and then click
OK
.
5. Review the License Agreement. Click
I accept the terms in this license agreement
, and
then click
Next
to continue.
Release 4.0 June 20, 2013