Vertical Express ICON 32, Руководство по эксплуатации продукта

Страница: 98 / 220

Adjustments Diagnostics Section
©Vertical Express 3-14 Printed in USA April 2020
This manual shows only the parameters that have an operational relevance to the ICON32. The UIT may have
additional parameters available, which should not effect the controller operation.
R10 — 0–1
Inconspicuous Riser Monitor Operation - If enabled, the activation of an inconspicuous
riser hall call will automatically activate the Inconspicuous Riser Operation.
Values:
0 = Disable
1 = Enable
R13 — 0–1
Inconspicuous Riser Deactivates on Emergency Power - If enabled, the activation of emer-
gency power will automatically deactivate the Inconspicuous Riser Operation.
Values:
0 = Disable
1 = Enable
R26 sec. 1–255
Inconspicuous Riser Deactivation Time - This adjustment sets the minimum amount of
time that the Inconspicuous Riser Operation will remain active (once it has been activated).
Note
: Typical adjustment value – The time required to enter the car and register a destina-
tion car call after response to an Inconspicuous Riser hall call.
R28 — 0–1
Inconspicuous Riser Deactivates Tenant Security - If enabled, the activation of the Incon-
spicuous Riser Operation will deactivate Tenant Security.
Values:
0 = Disable
1 = Enable
S10 — 0–10
Security Type – This adjustment (for car functions only) is a type of required Tenant Secu-
rity. The Type # must be coordinated with the group security type and the group functions.
See S43.
Values:
0 = (TYPE 0) No security required, or the group invokes security and car homes,
and shuts down if the return landing (S11) is set
1 = (TYPE 1) Car Call Lockouts in the group
2 = (TYPE 2) Car Call Lockouts in group with override inputs in the car
3 = (TYPE 3-1) Car Call Lockouts in group with override inputs in the car
4 = (TYPE 3-2) Security override output only
5 = (TYPE 4) Group Hall Card readers is an invalid selection for the car
6 = (TYPE 5) Security Override output only
7 = (TYPE 6) Car Call Lockouts at the car level
8 = (TYPE 7) Car Call Lockouts at the car level (no group function)
9 = (TYPE 8) Contract configured security
10 = (TYPE 9) Contract configured security
S11 floor 1–nf
Security Return Landing - The car will home to this floor when placed on Security Opera-
tion. The car call for this floor will not be locked out.
S12 F/R 0–1
Door to Open Upon Return - This adjustment sets which door (front or rear) opens when
car is homed to the Security Return Landing (see S11).
Values:
0 = Front Door
1 = Rear Door
S13 — 0–1
Allow DOB on Security - This adjustment determines whether or not the Door Open Button
(DOB) is allowed to open the doors at a secured opening.
Note
: This adjustment affects both front and rear doors.
Values:
0 = DOB is not allowed at secured floor.
1 = DOB is allowed at secured floor.
S14 — 0–1
One Car Call at a Time on Security - This adjustment allows registration of one car call at a
time while on security. All subsequent car call registrations will be inhibited.
Values:
0 = Car calls are not limited to one at a time.
1 = Car calls are limited to one at a time.
Adj
(cont.)
Unit Range Definition (cont.)