vc999 593.767, Оригинальное руководство по эксплуатации

Страница: 73 / 96

Shrink Tunnel VC999 ST2/ST2 D
Maintenance
2009-11-12
Art. no. 593.767 Page 73/96
10. Ensure that the protective rollers (9) are in-
stalled correctly at both sides of the belt
cartridge (5). The protective rollers can also
be inserted or removed with the belt car-
tridge installed.
Fig. 12/5
NOTICE
The machine must not be operated without the protective rollers (9) installed at both sides of
the belt cartridge (5)!
11. Install the belt cartridge (5) in the machine. Make sure that the notch (10) on the belt cartridge cor-
responds to the position of the motor shaft (11).
Fig. 12/6
NOTICE
The belt cartridge must be inserted as far as possible! This is only possible when the collecting
tray (6) has been inserted into the belt cartridge correctly. If the collecting tray has not be in-
serted, a mechanical safety device prevents correct closing of the service door.